3 Simple Ways To Weatherproof Your Garage Door

Do you spend a lot of time in your garage in the winter, even if your garage door allows cold air to leak in? If so, are you looking for some simple ways to reduce the amount of cold air that seeps through your garage doors? There are many things you can do to help your garage stay warmer, and here are three things you can do to your garage door to help with this problem.

Insulate the Door

You might not be ready to purchase new garage doors, but you might be willing to make some improvements to your existing doors to make them more airtight. The first thing you might want to consider doing is insulating your garage door. This is an excellent step to take if your garage door currently is not insulated.

According to House Logic, you can purchase a garage door insulating kit for $50 to $70. With this kit, you will have everything you need to insulate your existing door, and you can save money by doing the work yourself.

The type of insulation you use for your garage door will depend on the type of door you have. Foam board insulation is one of the best types to use, and this type can be taped or glued to a garage door. Batt insulation is another option, and you can use this for the door and for cracks near the door.

As you look for insulation to purchase, always compare the R-values of the products you are considering. R-value is a word that describes how well insulation blocks airflow, and higher R-values represent better insulation coverage.

Replace the Weather Stripping

If you look at the bottom of your garage door where the door rests on the ground, you should see a rubber strip that extends across the entire bottom part of the door. This strip is called weather stripping and is designed to block air from seeping under the door when the garage door is closed.

Weather stripping wears out over time, and installing a new piece is a good idea every few years. If your door does not currently have weather stripping, you can simply attach a new piece to the door. If your door does have weather stripping, you will need to remove it before placing a new strip on the door.

To attach the new place, you must:

  1. Cut it to fit – weather stripping often comes in really long pieces. Your first step is to measure the bottom of your door and cut a piece of weather stripping to this size. You can use leftover weather stripping for regular doors and windows at your house.
  2. Nail it in place – the second step is to nail the weather strip to the bottom of the door.
  3. Test it out – after you do this, you will have to test out the door to make sure it closes smoothly, and to ensure that it is flush against the floor of your garage.

Once you do this, your garage door will be as airtight as possible, but there is one other step you can take just to make sure that air cannot leak into your garage.

Seal All Gaps

The final step to take involves using leftover insulation or caulk to seal any remaining gaps you may have near your garage door. To do this, you must shut the garage door. When the door is shut, begin inspecting every area around the perimeter of your garage door. If you see any small gaps or holes, fill them in with caulk or insulation.

Completing these steps will help you stop the airflow between your garage and the outside of your house. If you need any help with these steps, or if you would like to replace your existing garage doors, contact a garage door company today for a quote.